Low Profile IN BOX® for Flat Surface Retrofit Construction
|
One piece, recessed electrical box with weatherproof in use extra duty cover for flat surfaces in existing construction. Non-metallic cover and base. Accepts most single gang wiring devices and uses standard indoor wall plates or a GFCI cover plate. Box and white cover are textured/ paintable. UV rated plastic for long outdoor life. For additional information, including specifications, dimensions, and applications - please click on a part number listed below. |
| Part Number | UPC | Trade Size | Unit Pkg | Standard Pkg |
| DBHR1C | 018997776044 | 1-Gang | 1 | 4 |
| DBHR1CGC | 018997089168 | 1-Gang | 1 | 4 |
| DBHR1W | 018997776068 | 1-Gang | 1 | 4 |
| DBHR1WGC | 018997089175 | 1-Gang | 1 | 4 |
| DBVR1C | 018997143136 | 1-Gang | 1 | 4 |
| DBVR1CGC | 018997089304 | 1-Gang | 1 | 4 |
| DBVR1W | 018997143143 | 1-Gang | 1 | 4 |
| DBVR1WGC | 018997089311 | 1-Gang | 1 | 4 |
Additional Information
IN BOX® for retrofit, flat surfaces includes box with weatherproof in use extra duty cover; installed bug plugs; (1) standard duplex and (1) standard GFCI face plate; (1) set installation screws; (1) NM cable connector; and (1) roll of caulk.IN BOX's® one piece assembly replaces the installation of an electrical box and bubble cover assembly.
Use the retrofit IN BOX on plywood, T-111, and other flat surfaces.
Install option: Cover is removable for easier device installation.
Installs in the wall, so less of it shows outside.
No gaskets required.
Listed